iRBeacon by Konkrete Technologies

Blacksheep

Member

Registered: 2015-12-07

Posts: 2

Signal length

I realize that the app is in early stages, hence patchy performance. I presume this will improve over time.
I do, however, have a problem with signals sent to my Panasonic TV:

The IRBeacon connects (on occasion) to the app, and the app seems to be sending correct signals, since once the TV is powered on, the app will successfully change channels, lower/raise volume etc. It will also power the TV off.

I cannot, though, power ON the TV, as this requires a long press on the TV remote's button, not a short one. The IRBeacon seems to be sending a signal that is too short, and therefore does not register with the TV to power it on.

Is there anything that can be done about this?

Dave

Member

Registered: 2015-06-26

Posts: 5

Re: Signal length

Throw them in the bin is probably the best solution. I have 4 of the units, none of which are worth their weight in plastic due to the complete lack of response by Konkrete Technologies.

Blacksheep

Member

Registered: 2015-12-07

Posts: 2

Re: Signal length

There does seem to be a distinct lack of activity on the forum, and shortage of response from Konkrete.
Is there anyone here?